Bettinardi Inovai 7.0 · Clubs

Putter

Bettinardi Inovai 7.0

2020–presentNotable

The story

The Inovai 7.0 arrived in Bettinardi's 2020 refresh as a maturation of the mallet concept the original Inovai introduced five years earlier: a 358g head built from 303 stainless steel and 6061 aircraft-grade aluminum with a platinum-and-cobalt-blue finish, F.I.T. face milling, 70-degree lie and 3-degree loft. It kept the family's signature look -- hollowed-out cutouts flanking the face and a solid rear bar curving upward, with weight pushed to the heel and toe for stability. Bettinardi offered it in three hosel configurations -- Spud (square-to-square strokes), Slant (arc strokes) and Center Shaft -- letting fitters match the same MOI-forward head to different stroke types instead of forcing one neck on everyone.

Standing

Notable

Plugged In Golf and MyGolfSpy both singled it out in independent 2020 first-look/review coverage as an unusually effective, unusually-looking mallet with one of the best-feeling milled faces around; consistent trade praise across two outlets, but no secondary-market collector premium.

Who it's for

Suits players who want maximum forgiveness in a mallet and don't mind a nontraditional silhouette; the three-neck system (Spud/Slant/Center) lets it fit square-to-square, arc, or center-shaft strokes alike. A traditionalist wanting a blade profile or classic toe-hang feel should look to Bettinardi's Studio Stock or BB lines instead.

Notable

358g total weight, built from 303 stainless steel plus 6061 aircraft-grade aluminum
Standard spec is 70-degree lie / 3-degree loft (center-shaft version)
Sold in Spud, Slant, and Center Shaft neck configurations
F.I.T. Face (Feel Impact Technology) milling
Platinum and cobalt-blue finish distinguished it from prior Inovai colorways

In its era

Part of Bettinardi's 2020 lineup alongside the BB series refresh, competing with Odyssey's Ten/Eleven and TaylorMade Spider X mallets of the same MOI-chasing moment; it followed the original 2015 Inovai and 3.0/5.0/6.0 generations and was itself superseded by later Inovai 8.0/9.0/10.0 releases.

Specifications

Category: Putter
Years: 2020–present
: 3

Forgiveness

8/10

Weight concentrated behind the heel and toe via the cutout construction gives a genuinely large, forgiving sweet spot; reviewers described the face as forgiving on mis-hits while still returning a soft, responsive strike -- MOI-first design, not a finesse blade.

Calibrated across the whole catalog — a tour blade scores low here on purpose; it means control, not ease.

On the used market

Used Inovai 7.0 heads trade roughly $150-$220 on 2nd Swing/eBay in 2026 against an original MSRP near $400 -- a typical ~45-60% depreciation for a five-year-old mid-tier mallet with no collector premium.